Ignis Pixel BubblePoi 16 with Pixel Knobs 5

First spherical pixel LED poi and pixel knob. By shape, weight, and size they are identical to those you get used to. Transforms into juggling/contact juggling balls. Includes pixel knobs.

Ignis Pixel BubblePoi 16 with Pixel Knobs 5
Set includes

Ignis BubblePoi are the first programmable LED poi of spherical shape for juggling and contact spinning. Owing to soft material, they are safe to spin. The shape, weight and size are almost identical to those contact poi you get used to spinning and juggling.

The system of inner channels with surficial distribution of weights makes balance ideal, enabling to do all possible tricks. Detach the cord and use BubblePoi as contact or juggling balls!

Unique lighting every time: upload your own images into the poi and knobs: colorful patterns, emoji, effects, etc. The system of timeline sequencing allows you to set the pictures in a row, so images change while you spin the poi.

Programming is carried out in Ignis application on your mobile phone. This also makes your phone a remote controller for your BubblePoi: launch them and switch pictures at a distance right from phone.

On default total length from poi bottom to top of the knob is 65 cm (25.6 inches) This length can be customized. Please leave your preferred length in comments to the order.

This modification includes also programmable Ignis Pixel knobs – your spinning is twice dazzling!

Ignis Pixel knob is not just a glowing ball. It's complete programmable device working the same way as all Ignis props. Upload your own images into the knob the same way as into the poi. You can compose up to 4 customized timelines from uploaded pictures. Totally you can upload up to 126 single pictures. For your convenience, initially you get the device with already uploaded library of pictures.

Currently, we offer three modifications of BubblePoi + Pixel knobs

Smart version additionally contains:
- Training statistics in the mobile application: you can see the number of spins, throws, drops, timing, calories, etc.;
- Image stabilization: retains width and position of an image in the air while spinning. Makes amusing illumination when the poi are untouched.
- 2 steel ball bearings: you can do orbitals and other tricks that require swivels;

Ultimate version contains all features of Smart version, but also has:
- 2 moisture-resistant ceramic ball bearings (instead of steel): apart from orbitals and other tricks that require swivels, you can get the ball rotating around its axis up to 5 minutes;
- extended battery capacity (in BubblePoi): works 35% longer than Basic and Smart version;

*Tricks count - throws, drops, stalls is still beta and may be not accurate. It will be improved with updates.

Technical characteristics
Resolution: Poi: 16 pixels (48 LEDs); Knobs 5 pixels (15 LEDs)
Rendering speed: up to 2500 rows/second
Length of LED part: Poi: 96 mm (3,78 inches); Knobs: 35 mm (1.4 inches)
Weight: 140-190 g (4.9-6.7 oz.)
Working time: Poi: 6h average; 1 hour full white; 15 h low brightness; Knobs: 4h average; 40 min full white; 10h low brightness
Number of colors: 16.7 million (Color depth 24 bit)
Battery capacity: from 2600 mAh
The price is for a complete set, which includes:
The price is for a complete set, which includes:
• Pair of digital spherical poi Ignis Pixel BubblePoi 16
• Pair of Pixel Knob handles
• Nylon or Soft braided non-springy cord
• 2 Micro-USB cables
• USB charger
• Stylish bag
• Mobile App Ignis Pixel
• Software for Ignis Pixel
• Basic set of images, developed by designer
• User manual (pdf)
First pixel LED poi in round shape that you are so familiar with
These poi are almost identical to your contact poi you get used to spinning and juggling
Ideal material
Even softer than your silicone practice poi. Material of BubblePoi allows to do all contact tricks that you already know. At the same time, they are extremely strong and child-friendly.
Owing to a system of inner channels with surficial distribution of weights, dynamics of these poi is almost identical to your practice contact poi.
Ignis Pixel BubblePoi 16 with Pixel Knobs 5 Owing to a system of inner channels with surficial distribut...
Usual size and weight
Standard diameter 96 mm (3.78 inches).
Weight can be adjusted from 140g (4.9 oz.) to 190g (6.7 oz.).
Total glowing
Three rows of LEDs from butt to top with no dead zones. The number of LEDs and brightness is 50% more than those of JellyPoi.
Why do we use 3D printing?
Why do we use 3D printing?

The case with surficial channels for LEDs and weights is impossible to create by traditional methods of industrial manufacturing – injection molding. The only way to get such geometry is additive technologies or 3D-printing.

Even Elon Musk uses additive technologies (metal 3D-printing) in his rocket engine SuperDraco for Crew Dragon spaceship to create a complex system of rocket chamber cooling inner channels, because otherwise it’s impossible to make this kind of structure.

What else?
Big battery with capacity 2600 mAh provides 2 times longer light time as compared to JellyPoi.
Average working time – 6 hours
In full white mode – 1 hour
On low brightness – up to 15 hours.
New soft
We use soft but nonstretching cord according to recommendations of top poi-spinners. It has special round braiding with diameter 8 mm.
Easy brightness control
Fast setting of brightness from one button without a mobile App allows to set an super bright “eye-burning mode” for instant performance or considerably extend light time for long practice.
Motion sensor
(in Smart and Ultimate version)

Built-in image stabilization

Spin slowly, spin quickly – an image in the air will stay the same size and same position

Training statistics in the mobile app: the time of using props, the number of turns, throws, falls, calories spent, etc., made during the entire time working with your poi

Built-in image stabilization Built-in image stabilization
Built-in image stabilization Built-in image stabilization
It turned out cooler than we expected.
From poi to ball! Detach the cord and your poi turn into super-bright balls! LED balls for classic or contact juggling. They are cool to throw, get your children busy for a couple of hours and even play mini-soccer! Ball spins while flying and makes pictures visible. In practice, it turned out even funnier than we expected!

And finally

Pictures on the surface

We endowed Smart and Ultimate version of BubblePoi with static spin stabilization magic power💫 to give you more fun. Rotate the poi around its axis and magic will happen – you will see a picture on the surface of the ball.

(In Ultimate version with ceramic ball bearings spin time to stop is up to 5 minutes!)

BubblePoi with Pixel Knobs feature set
Basic Smart Ultimate
Detachable cord
Black braided nylon cord 7mm Soft braided non-springy white cord 8mm Soft braided non-springy white cord 8mm
Upload pictures support via Android application
Yes Yes Yes
Training statistics support via Android application
No Yes Yes
Image stabilization option
No Yes Yes
Static spin stabilization, time of rotation till full stop
No up to 30 seconds up to 5 minutes
Swivel inside the knob
No Steel ball bearing Corrode resistant ceramic bearing
Swivel inside the poi
No Steel ball bearing Corrode resistant ceramic bearing
Detachable cord, kinder ball/juggling ball/contact juggling functionality
Yes Yes Yes
2600 mAh 2600 mAh 3500 mAh
~14 h ~14 h ~18 h
Pixel Knob battery capacity
380 mAh 380 mAh 380 mAh
Average light time on 50% brightness
~4 h ~4 h ~4 h
Price for set of 2 pois with 2 Pixel Knobs (contact with us to order 1 or 3 pois)
US $298
US $438
US $538
Not sure which model to choose?
We will gladly give info online, by email, by phone or any other way convenient for you.
Choose preferred way of communication
Terms and conditions Banking details
English-speaking customer service
pixel@ignispixel.com +7 977 869 25 93 Request a callback